Triggers & Sync

Phottix Strato II Multi 5-in-1 Trigger Set for Nikon

The Strato II Multi is a flash trigger and it can be used as a wired or wireless shutter release. The 2. 4 GHz. transmitter and receivers offer ranges of more than 150 meters and sync at speeds of 1/250 second.  ...

Metz 15-50 Coiled Sync Cord

Metz coiled sync cable which is compatible with the Metz 15 MS-1 Digital wireless macro flash.

Metz 36-50 Standard PC Sync Cord

This is a nicely made little PC cord which inserts into the Metz 'standard' SCA 301 adapter, which itself can be used upon any of the SCA-system flashes with their interchangeable adapters.It is perfect for use directly upon...

PocketWizard AC3 ZoneController for Canon

The AC3 ZoneController for Canon is the gem of the ControlTL® product line. Add it to your on-camera MiniTT1® Transmitter or FlexTT5® Transceiver and you instantly have three zones of flash control. Whether working in...

PocketWizard AC7 RF Shield for FlexTT5

The Pocket Wizard AC7 RF Shield for FlexTT5 solves the problem of limited performance of the FlexTT5 radio transceiver when operated using the Canon 580EX, 580EX II and 430EX flashes, caused by interference emanating from...

PocketWizard AC9 AlienBees Adapter for Canon

The PocketWizard AC9 AlienBees Adapter for Canon allows remote control of AlienBees and White Lightening flash heads as well as Zeus power packs when used with a PocketWizard MiniTT1 transmitter or FlexTT5 transceiver. This...

PocketWizard HBM3 Hasselblad Motor Drive Cord - 91.5cm

The Pocket Wizard HBM3 Motor Drive Cord connects to the camera's remote cable socket, and enable your Pocket Wizard radio slave to trigger the camera's shutter. This cable is 3' long, and will trigger Hasselblad EL Series...

PocketWizard N-MCDC2-P Pre-Releasable Nikon4 Pin MotorDrive Cord91.5cm

The Pocket Wizard N-MCDC2 Electronic Remote Cable is designed to connect a PocketWizard MultiMax with ACC port or TT5 trigger device to a Nikon camera supporting the MD-DC2 type remote release connection and Pre-Trigger...

PocketWizard NM4-ACC Nikon 4Pin MotorDrive Cord for ACC MultiMax91.5cm

The PocketWizard NM4-ACC Remote Cable is for remotely triggering the electronic shutter release of Nikon DSLR's cameras equipped with a 4 pin Remote Terminal (except D70). It is required for remote camera triggering with a...

PocketWizard S-RMS1AM-P Pre-Releasable Sony Motor Drive Cord - 91.5cm

Pre-Trigger Remote Cable for connecting a Plus II or MultiMAX with no ACC port to a Sony or Minolta remote shutter release terminal, through a Pre-Trigger switch.Cable length: 3' (91.5 cm)From 1/8" (3.5 mm) Mono MiniphoneVia...

PocketWizard M3H Miniphone to 3 Female Household Cable

This is a Pocket Wizard M3H 16" straight Miniphone to 3 Female Household Cable. Although the Pocket Wizard system allows you to fire your strobe from your camera without a wire between the two, the receiver still needs a...

PocketWizard MS1 Miniphone to Sunpak Cable

This Pocket Wizard MS1 Connection Cable is a 12" long cable that features a Miniphone plug at one end to connect to the receiver, and a Sunpak 1-pin plug at the other end, for use with Sunpak flash units that have a 1-pin...

PocketWizard S-RMS1AM-ACC Sony Motor Drive Cord for ACC MultiMax

Pre-Trigger Remote Cable fFor connecting a PlusX, Plus III, FlexTT5 or MultiMAX with ACC port to a Sony or Minolta remote shutter release terminal.Cable length: 3' (91 cm)From 1/8" (3.5 mm) Stereo MiniphoneTo Sony or Minolta...